The contact position test with the newly developed Length Measuring Pin is the alternative to use Push Back Pins or Collar Pins. In addition to the electrical test the exact position of the terminals in the connector will be tested.
Advantages of the Length measuring pin
- Easy to adjust via CS WIN nx Test Software (Version 3.7.4.0) or with the TSK Cable Tester CT15i, CT30i or CT30ix (Software Version 1.12.7)
- Contact distances up to a 1/10" are easily made
- The theoretical resolution is 5/100 mm
Applications
- Test the correct position of terminals in the connector housing
- Identify the exact position of the terminal
Function Description
With the Length Measuring Pin, it is possible to identify the exact position of a contact in the connector housing. The set up the Length Measuring Pin is not like the set up of the collar pin and the push back pinto measure or calculate the contacting position for determining the module construction. The set up is possible via the short circuit and wiring testers and their software.
Features
- Minimum contact spacing 1 / 10 "
- Adjusting with the Test Software CS WIN nx (Version 3.7.4.0) or the cable tester CT15i, CT30i and CT30ix (Software Version 1.12.7)
- Various head types for nearly all terminals
- The theoretical resolution is 5 / 100 mm
Technical parameters
- min. contact gap: 1/10“
- Head types: various
- Spring force travel: max. 5,0 mm
- Tolerance range: +/- 0,2 mm
- Adjustment: via CS WIN (nx) or CT15i/CT30
- Spring force: 1,5 N
- Lifetime: min. 100.000 Insertion cycles
Data Sheet (PDF)
