The IntelliMod programmer is a hand-held unit to configure IntelliMod-boards. Equipped with a large display and user-friendly arrow keys, it offers an easy end-user guided way to change or set parameter for IntelliMod-boards controlled TSK modules.
The IntelliMod-Programmer is connect via adapter cable to the boards to be
configured.
Calling the Start menu, an automatic detection of the board and a review of the firmware starts. If necessary, the IntelliMod-Programmer provides a firmware update for the IntelliMod-board.
Important:
You need to know the values to be setup. See documentation IntelliMod (leak test or color recognition).
Features:
- easy to use
- easy to handle
- robust in operation
- flexiebel for many applications
Applications, Supported IntelliMod variants:
- 241 292 Standard IntelliMod (including extensions):
- 297 186 with switch-on delay
- 298 776 filling time higher then 20 sec
- 278 487 tube test with digital pressure sensor
- 230 2946 holding time adjustable up to 7 min.
- 232 3295 color test with self-locking - 298 777 Eyelet test without height control
- 231 3850 Eyelet test with height control
- 231 6858 Tube test modules (flow measurement), 1 Satellit modole
- 231 4215 Tube test modules (flow measurement), 3 Satellit modules
Accessories:
The IntelliMod-programmer is supplied with the accessories in a robust case. The case includes the IntelliMod- programmer, the adapter cable, 3 AA batteries 1.5 V and the operating manual.
Technical Data:
Processor: ATMega 128, 16 Mhz
Input: plastic foil keyboard
Output: 2.1’’ multicolor display
Power Supply: 3 x 1,5 V AA Batteries
Dimension: 75 x 155 x 30 mm
Weight: 80 g, without Batteries
